Cover Styl range
Wood
NF36Biscuit Oak
Warranty : 10 years
Application temperature : From +15°C to +25°C
Storage from +5°C to +35°C : 3 years
Length : 50 m
Width : 122 cm
Primer/Primer + : Yes
Kraft paper release liner : Yes
Stretchable : Yes
Calendered polymeric : Yes
Interior installation : Yes
Outside installation : No
UV-Resistant : Yes
Permanent Air Release Adhesive : Yes
Appearance : Mat
Thickness : 250 µ
Scratch-proof : Average
CE : Yes
IMO : Yes
MED : Yes
RAIL : Yes
REACH : Yes
TCHIBO : Yes
TABER TEST : Yes
VOC : Yes
Adhesive strength
91 minutes after installation 1.04 Kg/cm
24 hours after installation: 1.43 Kg/cm
3 days after installation: 1.51 Kg/cm
7 days after installation: 1.65kg/cm
91 minutes after installation 1.04 Kg/cm
24 hours after installation: 1.43 Kg/cm
3 days after installation: 1.51 Kg/cm
7 days after installation: 1.65kg/cm
Adhesive strength at high temperature
After the 1st day: 1.37 Kg/cm
After 7 days: 1.03 Kg/cm
After the 1st day: 1.37 Kg/cm
After 7 days: 1.03 Kg/cm
DURABILITY
This product offers exceptional resistance to water, dirt, abrasion, UV rays and wear (yellowing, crackling, scaling, delamination).
This product offers exceptional resistance to water, dirt, abrasion, UV rays and wear (yellowing, crackling, scaling, delamination).
MAINTENANCE
For daily care and maintenance of the film use only neutral pH detergents, do not use products with too much acidic or basic pH.
- Hot water (not boiling) can help eliminate stubborn stains
- In some cases, even a solution based on isopropyl alcohol and water can be effective (70% ISO 30% H2O. Not on printed Cover Styl’)
- Use only soft cloths or sponges to clean the vinyl (except glitter)
- If persistent stains are present it means that care and maintenance have not been performed correctly. In this case carry out a repair with patch (not guaranteed but effective and economical) or complete replacement of the vinyl;
- Don’t use any organic-based cleaning product like ammonia or polish to clean vinyl
For daily care and maintenance of the film use only neutral pH detergents, do not use products with too much acidic or basic pH.
- Hot water (not boiling) can help eliminate stubborn stains
- In some cases, even a solution based on isopropyl alcohol and water can be effective (70% ISO 30% H2O. Not on printed Cover Styl’)
- Use only soft cloths or sponges to clean the vinyl (except glitter)
- If persistent stains are present it means that care and maintenance have not been performed correctly. In this case carry out a repair with patch (not guaranteed but effective and economical) or complete replacement of the vinyl;
- Don’t use any organic-based cleaning product like ammonia or polish to clean vinyl
Non-contractual data and visuals, we reserve the right to modify the composition of its films at any time.